Prism Hardscapes Verona fire and water bowl on a pool wall

Fire and Water Bowls: How They Work and How to Choose One

Reviewed November 2026 by the American Fire Features team

A flame on top, a sheet of water into the pool below. Here is how a fire and water bowl is built, what it needs at the site, and how to pick the style and size for your pool.

The short answer

A fire and water bowl is a concrete or GFRC bowl with a gas burner in the center and a spillway or scupper on the side. It needs two connections: a gas line for the burner and a water line from your pool's circulation system for the spillway. The flame and the water never meet, so the bowl can burn and pour at the same time, or run either one on its own.

What is a fire and water bowl?

It is two features in one piece. The bowl holds a gas burner covered with fire glass or lava rock, and an open channel on one side carries pool water out of a spillway or scupper and back into the pool. Set on the coping or a raised pool wall, it gives you moving water by day and fire at night from the same spot.

Prism Hardscapes Sorrento fire and water bowl on a pool wall
Prism Hardscapes Sorrento 33" on a raised pool wall.

Every bowl we carry is cast in concrete or GFRC, glass fiber reinforced concrete, and finished by hand by an American maker: Prism Hardscapes, Fire by Design or Slick Rock Concrete.

Back to top

How does a fire and water bowl work?

Inside, the bowl is divided. The burner sits in a sealed pan in the center, fed by a gas line through the bottom. Around it, a water channel takes the flow from your pool pump and sends it to the spillway or scupper. Your pool contractor plumbs the water side, and a licensed gas technician connects the burner.

Top view diagram of a fire and water bowl with the burner box in the center and the water channel to the spillway
Top view: the burner box sits apart from the water channel that feeds the spillway.
Connection What it feeds Who installs it
Gas line The burner, natural gas or propane Licensed gas technician
Water line The spillway or scupper, from the pool circulation system Pool contractor
120V power Electronic ignition models only Electrician
Pro tip

Run the gas line, the water line and, for electronic ignition, the power to each bowl location before the coping or the pool wall is finished. Adding them later means cutting into finished work.

Back to top

Will the water put out the flame?

No. The water leaves the bowl through the side, away from the burner, so the flame and the water stay apart. That is also why you can run the water feature during the day with the pump and light the fire only in the evening.

Back to top

Which style fits your pool?

The style is mostly about how the water leaves the bowl and the shape it makes against the pool.

Other styles How the water leaves Examples
Scupper From a spout on the side Fire by Design Scupper Round Wok and Oblique Scupper
Conical Over the rim of a tapered bowl Slick Rock Cascade Conical, hand cast in Boerne, Texas
Vase Down the side of a tall vessel Fire by Design Legacy vase, 30 by 24 inches
Back to top

What size fire and water bowl do I need?

Measure the coping or the top of the pool wall where the bowl will sit. The bowl should sit fully on it, with the spillway past the edge of the water. The Prism Hardscapes bowls run from 29 to 33 inches across.

Diameter Examples Good for
Under 31 in Prism Hardscapes Moderno 2 at 29 in, Fire by Design Legacy vase at 30 x 24 in Narrow coping and raised pool walls
31 to 33 in Prism Hardscapes Ibiza 31 in, Verona 32 in, Sorrento 33 in, Toscana 33 in Pairs or rows along a pool wall
Planning a pair

Bowls are usually set in pairs or rows. Space them evenly from the center of the wall and plan one gas, one water and, if needed, one power connection per bowl.

Back to top

Electronic or match-lit ignition?

Both work by a pool. The difference is how you light the bowl and what the site needs.

Electronic ignition Match-lit
How you light it A switch, a remote or the pool's control system A key valve and a long lighter
Power at the bowl 120V required None
Best for Bowls across the pool or several bowls at once Bowls you can reach easily, and simpler installs

Each listing names the ignition in the title, and most bowls come in both versions. Our match-lit ignition guide covers lighting and installation.

Back to top

Who makes the bowls we carry?

Three American makers, each with its own way of working.

Maker How the bowls are made Shop
Prism Hardscapes Commercial-grade concrete fire and water bowls produced in-house by Prism Prism Hardscapes
Fire by Design GFRC bowls and vases made to order, with electronic or match-lit ignition Fire by Design
Slick Rock Concrete Cascade bowls hand cast in Boerne, Texas, in 15,000 psi concrete Slick Rock
Back to top

Questions we get

What does a fire and water bowl connect to?

Two lines: a gas line to the burner and a water line from your pool's circulation system to the spillway or scupper. Electronic ignition models also need 120V power at the bowl.

Can I run the water without the fire?

Yes. The water runs with your pool pump and the fire runs on its own valve or ignition, so you can use either one alone. Your pool and gas installers set up the controls for your system.

Natural gas or propane?

Either. Each bowl is offered for natural gas or propane, and you choose the fuel when you order, so confirm what is available at the pool first.

Is electronic ignition a good choice by a pool?

It is popular, because the bowl lights from a switch, a remote or the pool's control system instead of reaching over the water with a lighter. It needs 120V power at the bowl. Match-lit models with a key valve need no power.

Can I put a fire and water bowl on a raised wall?

Yes, that is the most common setup. The wall needs to be wide enough for the full bowl, with the gas, water and any power lines brought up inside it.

Talk to a fire specialist

Planning bowls for a pool?

Send us the pool plan or a photo of the wall, and we will help you choose the bowl, the size and the ignition, and list what your installers need at each spot.

Sources: product listings for Prism Hardscapes, Fire by Design and Slick Rock Concrete fire and water bowls at American Fire Features, read November 2026. The product page and the manufacturer's installation manual govern if anything here differs.

Back to blog

Check Out these fire features!

1 of 11