Buying Guide
Learning Center
Buying guide
Seven decisions, in order, from choosing the piece to the day it arrives.
Before you start
Much of what we carry is made to order, so a few decisions have to be made before the order goes in: the fuel, the ignition and the finish. Make them once, with the site in front of you, and the piece arrives ready to install.
If you are working with a designer, landscaper or builder, our Professional Program is built for trade clients.

STEP 01
Choose the fire feature
Start with how the space will be used. A fire table is a place to sit and talk, a fire bowl is a sculptural centerpiece, and a burner kit turns a custom build into a gas fire pit.
- Fire tables: most Prism Hardscapes and Slick Rock Concrete tables run about 65,000 BTU/hr
- Fire pits and bowls: concrete and metal, round, square and linear
- Fire and water bowls: flame over a water spill for pools
- Burners and ready-to-finish kits: for a pit you build
- Patio heaters: Eurofase electric and Schwank gas infrared

STEP 02
Measure the space and the opening
Measure where the feature will sit and leave room to walk around it. Clearances to walls, overhangs and furniture are listed in each installation manual, so read it before you set the location.
For a fire pit you build, the inside of the opening sets the burner: an 18 inch opening takes a burner of about 60,000 to 100,000 BTU/hr, a 36 inch opening about 300,000. For heat over a seating area, a Eurofase EF60 covers about 121 square feet.
Burner sizing guide
STEP 03
Pick natural gas or propane
Natural gas runs from your meter and never runs out. Propane runs from a tank you refill, so the feature can go where there is no gas line.
Most features are sold as separate natural gas and propane versions, so the fuel is chosen when you order. If you want the tank out of sight, look at models with tank storage or a matching tank enclosure.
Natural gas or propane guide
STEP 04
Decide how it lights
The ignition sets how you start the fire and how much wiring the site needs. For Warming Trends burners, the options we carry include:
- Match-lit: a key valve and a lighter, no power needed
- Mercury ignition: battery operated, no electricity, for burners up to 240,000 BTU/hr
- 3VIK electronic ignition: battery pack, for burners up to 120,000 BTU/hr
- 24 volt Platinum hot surface ignition: up to 680,000 BTU/hr, with a wind cage for the pilot
For fire tables and bowls, ask us which ignition each model offers.
Remote controls
STEP 05
Choose the material and finish
Most of the concrete pieces we carry are glass fiber reinforced concrete, which lets the shell be thinner and lighter while it handles heat and weather. Slick Rock Concrete casts in 15,000 psi high-performance concrete with micro-glass fibers.
Color, finish, size and add-ons set the lead time on made-to-order pieces, and we confirm it by email after you order.
Shop GFRC concrete
STEP 06
Add media, wind guards and covers
Order the finishing pieces with the feature so everything arrives together.
- Fire media: fire glass or lava rock, to the depth in the manual
- Wind guards: tempered glass that keeps the flame steady, required on some Prism Hardscapes Tavola models
- Covers and lids: protect the burner between uses

STEP 07
Plan delivery and installation
A licensed gas technician connects every gas feature, sized and installed to the National Fuel Gas Code, and many cities need a permit for a new gas line.
Orders over $999 ship free to the curb in the continental U.S. by LTL freight. White-glove delivery is available by quote. Inspect every carton when it arrives, note any damage on the delivery receipt and tell us within 48 hours.
Shipping detailsBefore you order
Our terms in short
The full policy pages govern. These are the points clients ask about most.
Shipping
Free curbside LTL delivery on orders over $999 to the continental U.S. White-glove delivery by quote.
Read the policyMade to order
Custom and made-to-order pieces cannot be cancelled once in production or returned. Read the full terms before you order.
Read the policyWarranty
Every product carries its manufacturer's warranty, and we help you file a claim if you need one.
Read the policyPrice match
Find a lower price at an authorized online retailer within six months of your order and we refund the difference.
Read the policyTalk to a fire specialist
Planning a project?
Send us the site, the fuel you have and the look you want. We will help you choose the piece, the ignition and the finishing parts, and answer lead time questions before you order.
866-881-4048Send your project- Phone
- 866-881-4048
- info@americanfirefeatures.com
- Business address
- 500 Delaware Ave, Suite 1
Wilmington, Delaware 19801
United States



